Grow tents
Grow Lights
Ventilation and Climate
Roothold and growing media
Soil and Pots
Nutrients and Supplements
Timers and Controllers
Measuring devices
Hydroponics and Irrigation systems
Scissors and Trimmers
Machines and Devices
Accessories
G-system Light controller 2channel (V1.60)
-
Code:611076
-
Weight:0.000 Kgs
This light controller with a 2x16 character display covers all basic needs. It has a keyboard with 4push buttons, UP, DOWN, ENTER, Save/Escape.
Functions:
Start/Stop by time, reduce power according to the room temperature, minimum and maximum dimming range, emergency stop when the room gets to hot accompanied with a recovery temperature, restart delay for HPS and MH lamps to not start under hot bulb condition. There are sunrise and sunset functions. In the sub settings you can choose the LCD back-light behavior set current time with 24h format, stet output signal from 0-10V or PWM (pulse width modulation), change °C to °F and languages. The light controller have 2 individual channels for 2 separate rooms.
The device comes with a 4m long temperature cable for one channel. An adapter allows to split the output signal to several connectors, terminal block, RJ11 (for several brands, more will follow). Screws and dowel for wall mounting.
How many lamps can you connect?
Depending on the lamps you have, we provide a 50mA output signal per channel, which should be able to connect at least >50 to endless lights working with 0-10V signal. If the light offers a PWM input the cable length and amount of lights >1'000
Watch tutorial on YouTube: (English)
Features:
Time & Date
Day counter
Dim by temperature
Settings of the dimming range
Shut down by temperature
Restart delay
Sunrise
Sunset
0-10V or PWM signal
Temperature offset (calibration)
Temperature °C or °F
Back-light setting
Language settings; English, Spanish Italian, German and French
Packing contains:
1x Light controller
1x Temperature sensor
1x Mounting screws & dowel
1x User manual
1x Power supply (depending on the variant)
Is the power supply required?
If the LED driver/ballast provide 2wire Signal-GND then yes,
Ii the LED driver/ballast provide 3wire Signal-GND-VDC >10V there is no power supply required.
Not included in the packing is the ballast/LED cable which connects with a RJ45 connector on the light controller side. Usually this is provided by the lamp or you can buy this in any electro domestic or computer shop.
Technical data:
Size: WxHxD = 140x75x35mm
Weight: 375g
Power supply 12VDC 100mA
Digital sensor 5V Measures temperatures from –55°C to +125°C (–67°F to +257°F)
0.5°C accuracy from –10°C to +85°C
Protection class IP20
Settings range:
Functions:
Start/Stop by time, reduce power according to the room temperature, minimum and maximum dimming range, emergency stop when the room gets to hot accompanied with a recovery temperature, restart delay for HPS and MH lamps to not start under hot bulb condition. There are sunrise and sunset functions. In the sub settings you can choose the LCD back-light behavior set current time with 24h format, stet output signal from 0-10V or PWM (pulse width modulation), change °C to °F and languages. The light controller have 2 individual channels for 2 separate rooms.
The device comes with a 4m long temperature cable for one channel. An adapter allows to split the output signal to several connectors, terminal block, RJ11 (for several brands, more will follow). Screws and dowel for wall mounting.
How many lamps can you connect?
Depending on the lamps you have, we provide a 50mA output signal per channel, which should be able to connect at least >50 to endless lights working with 0-10V signal. If the light offers a PWM input the cable length and amount of lights >1'000
Watch tutorial on YouTube: (English)
Features:
Time & Date
Day counter
Dim by temperature
Settings of the dimming range
Shut down by temperature
Restart delay
Sunrise
Sunset
0-10V or PWM signal
Temperature offset (calibration)
Temperature °C or °F
Back-light setting
Language settings; English, Spanish Italian, German and French
Packing contains:
1x Light controller
1x Temperature sensor
1x Mounting screws & dowel
1x User manual
1x Power supply (depending on the variant)
Is the power supply required?
If the LED driver/ballast provide 2wire Signal-GND then yes,
Ii the LED driver/ballast provide 3wire Signal-GND-VDC >10V there is no power supply required.
Not included in the packing is the ballast/LED cable which connects with a RJ45 connector on the light controller side. Usually this is provided by the lamp or you can buy this in any electro domestic or computer shop.
Technical data:
Size: WxHxD = 140x75x35mm
Weight: 375g
Power supply 12VDC 100mA
Digital sensor 5V Measures temperatures from –55°C to +125°C (–67°F to +257°F)
0.5°C accuracy from –10°C to +85°C
Protection class IP20
Settings range:
